电脑技术学习

VMware下Solaris 9/10中显示设置的成功方法

dn001
我下了南非蜘蛛装好的Solaris10的vmdisk(谢谢他),
用sunwxf86-vmware.tar.gz装XFree86驱动后,kdmconfig却找不到
XF86-VMWARE,我以为solaris10不行,于是我下了Solaris9(u6),全新
安装在VMware4.5下,再装sunwxf86-vmware.tar.gz,成功选到了
XF86-VMWARE,重启后顺利进入GNOME的Xwindow.
我又在Solaris10下重装sunwxf86-vmware.tar.gz,始终找不到
XF86-VMWARE,于是我试着按Solaris9的设置修改Solaris10:
1.vi /etc/openwin/server/etc/OWconfig
2.修改如下:
class="XSCREEN" name="SFWxf86.vmware"
ddxHandler="ddxSFWxf86.vmware.so.1"
ddxInitFunc="SFWxf86Init"
AdapterManufacturer="XF86-VMWARE"
AdapterModel="VMware virtual video adapter";
class="XSCREENCONFIG" name="vmware"
device="SFWxf86.vmware"
res="800x600"
defdepth="24"
size="17-inch (43cm)"
board="xf86/vmware.xqa"
monitor="mfreq/svga.vda"
dpix="58"
dpiy="58"
desktop="800x600"
DisplayChksum="0xcd2e6ec"
hz="56"
MonitorManufacturer="Super VGA"
MonitorModel="35.5 kHz (800x600 @ 56Hz and 1024x768 Interlaced)"
dcm="Adapter";
class="XDISPLAY" name="0"
coreKeyboard="IKBD"
corePointer="ps22b"
listOfScreens="vmware";
  3.重启后顺利进入GNOME!!

标签: